Forster Outside Neck Turner Accessory for Original...

Unlike hand held neck turners which are centered only on the pilot, the Forster Outside Neck Turner turns your case neck concentric to its true axis. It produces neck walls of uniform thickness and exact outside neck diameter. Properly adjusted, it will turn necks to within a tolerance of .0001". The cutter head of the Outside Neck Turner has an adjustable circular carbide cutter for a lifetime of reliable use. In operation, the wall of the neck passes progressively between the pilot and the cutter, as the neck wall of the case is reduced to a uniform thickness. You control the rate of feed by rotating the feeder cam while a mechanical stop controls the length of the cut. The short pilot used in case trimming is replaced with a longer, hardened and ground pilot of the desired caliber. To change calibers (any diameter from .204 to .375) simply insert the correct pilot and make the necessary adjustments. The Forster Outside Neck Turner is designed to be used after the neck has been resized and expanded. Cases longer than 2.80" require a long case trimmer base.

• Forster Outside Neck Turner Accessory for Original...