Product Overview
Sikaflex-292i is suitable for structural joints in marine constructions which will be subjected to high dynamic stresses. It is suitable to bond metals, particularly aluminum (including anodized finishes), metal primers and paint coatings (2-component systems), or ceramic materials, plastics such as GRP (unsaturated polyester resin), ABS, etc. Seek manufacturers advice and perform tests on original substrates before using Sikaflex-292i on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility.
- Excellent adhesion properties and a good mechanical strength. Sikaflex-292i meets the low spread of flame requirements set out by the International Maritime
- It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications.
- Bonds well to a wide variety of marine substrates and can be overpainted if required Solvent free and very low VOC, Wheelmark approved Designed for professional use
- DURABILITY: Resistant to fresh water, sea water, limewater, sewage effluent, diluted acids and caustic solutions, temporarily resistant to fuels, mineral oils,
- PERFORMANCE: It's used above and below water line. It may be squeezed or brushed into place. Excellent bond, fast tack-free time and can be painted.
