Product Overview
Each purchase includes 1 SET of front or rear brake pads. This will replace BOTH the passanger's and driver's side pads on either the front or rear.
HPS - High Performance Street disc brake pads are world renowned for superior stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performances HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.
The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means youll have a highly durable brake pad with less brake dust.
HPS Ferro-Compound Features:
-Increased stopping power
-High friction/torque hot or cold
-Gentle on rotors
-Extended pad life
-Low dust
-Virtually noise-free
All Hawk Performance High Performance Street brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer's workmanship and materials.
Note: Hawk Performance burnishes its brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.
Burnishing Instructions
1. Make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
- HPS - High Performance Street brake compound
- Increased stopping power
- Gentle on rotors
- Virtually noise-free
- High friction/torque hot or cold
